Zenith Z42PX2DH Instruções de Operação descarregar pdf (Página 49)

ExternalControlDeviceSetup

*All data are transmitted by Hexadecimal code

*Two/One part Channel: 6th bit

This bit is used in a cable-ready system.

*Using physical channel: 5th bit

If the channel band is NTSC air or NTSC cable, channel tun-

ing can be done by only physical channel. In this case, using

physical channel bit must be low(0).

But if the channel band is ATSC air or ATSC cable, there are

two cases that physical channel enable or disable.

If the physical channel sending is meaningful, you should set

this bit low(0). If the physical channel sending is meaningless,

yeu should set this bit high(l).

Example)

1. Analog channel: NTSC cable, channel number(35), main

picture Command: ma 00 23 xx xx xx xx 01 attribute(0x01):

main picture, two part(it's not mandatory), using physical chan-

nel, NTSC cable 'xx' data: don't care major and minor channel

number in case analog channel tuning.

2. Digital channel: ATSC air, channel number(don't know phys-

ical channel, major(30), minor(3)), sub picture

Command: ma 00 xx 00 1E 00 03 A2 attribute(0xA2): sub pic-

ture, two part, not using physical channel, ATSC air 'xx' data:

don't care analog channel number in case digital channel tun-

ing.

3. Digital channel: ATSC air, channel

number(physical(20),major(20), minor(3)), sub picture

Command: ma 00 14 00 14 00 03 82 attribute(0x82): sub pic-

ture, two part, using physical channel, ATSC air.

A cMTowledqement

[a][ ][Set ID][ ][OK][DataO][Datal][Data2][Data3][Data4][Data5][x]

[a] ][Set ID][ ] NG][Data0 [x

23. Channel Add/Del (Command: m b)

I_ To add and delete the channels

Transmission

I[m][b][ ][Set ID][ ][Data][Cr] I

Data 0: Channel Delete

1: Channel Add

Acknowledgement

[b][ ][Set ID][ ][OK][gata][x]

[b] ][Set ID][ ][NG][Data][x]

25. Input select(Command: x b) (Main Picture Input)

I_ To select input source for TV.

Transmission

I[x][b][][Set ID][][Data][Cr] I

Data Structu re

DATA(Hex) INPUT

oo DTV (Antenna)

01 DTV (Cable)

10 Analog (Antenna)

11 Analog (Cable)

20 Video

21 Front Video

40 Component 1

41 Component 2

50 RGB DTV

6O RGB PC

90 HDMI/DVI

Acknowledgement

I[b][ ][Set ID][ ][OK/NG][Data][x]

24. Key (Command: m c)

I_ To send IR remote key code

Transmission

J[m][c][][Set ID][ ][Data][ ][Cr] I

Data Key code: Refer to page 51.

Acknowledqement

i[c][][Set ID][ ][OK][Data][x] I

206-4022 Owner's Manual 49

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 59 60

Comentários a estes Manuais

Sem comentários

Zenith Z42PX2DH Instruções de Operação Página 49

Comentários a estes Manuais

Manuais e produtos relacionados com TVs LCD Zenith Z42PX2DH